N4.50 Nanni
Nanni
Ref. N4.50
Marine diesel inboard engine with 47.5 HP (35.42 kW) output and 2.197 litre displacement. Supports Shaft Line and Sail Drive configurations.
Characteristics
Hover any value for notes and sourcesHorse Power
—
Hp
Torque
—
Nm
Torque
—
Weight
—
KG
Number of Cylinders
—
Cylinder Layout
—
Displacement litres
—
Liter
Is Injection
—
Has a Turbo
—
Block Material
—
Cooling System
—
Compression Ratio
—
Starter Type
—
RPM Range
—
Emission Standard
—
Dimensions
—
Certifications
—
Documentation URL
—
Maintenance schedule
13 tasks · 7 intervals
No maintenance data is available for this equipment. Showing generic defaults —
likely incorrect for this specific model.
| Task | After 50h | Daily | Every 12mo | Every 24mo | Every 36mo | Every 200h | Every 500h |
|---|---|---|---|---|---|---|---|
| Change Change Fuel Filter | |||||||
| Change Change Oil | |||||||
| Change Change Oil Filter | |||||||
| Inspect Inspect coolant levels & state | |||||||
| Inspect Inspect there is no clogging, that filters are clean | |||||||
| Inspect Check for water in fuel filter | |||||||
| Change Change Air Filter | |||||||
| Inspect Inspect belt tension & Inspect belts for wear and tears | |||||||
| Change Change Raw water impellar | |||||||
| Inspect Inspect calibrated heat exchanger cap visually | |||||||
| Inspect Inspect thermostat visually | |||||||
| Inspect Inspect engine mounts visually | |||||||
| Mechanical Check & Adjust valve clearances |