N4.80 Nanni
Nanni
Ref. N4.80
Marine diesel inboard engine delivering 80 HP (53.4 kW) with a displacement of 2.434 litres. Compatible with Shaft Line and Sail Drive setups.
Characteristics
Hover any value for notes and sourcesHorse Power
—
Hp
Torque
—
Nm
Torque
—
Weight
—
KG
Number of Cylinders
—
Cylinder Layout
—
Displacement litres
—
Liter
Is Injection
—
Has a Turbo
—
Block Material
—
Cooling System
—
Compression Ratio
—
Starter Type
—
RPM Range
—
Emission Standard
—
Dimensions
—
Certifications
—
Documentation URL
—
Maintenance schedule
13 tasks · 7 intervals
No maintenance data is available for this equipment. Showing generic defaults —
likely incorrect for this specific model.
| Task | After 50h | Daily | Every 12mo | Every 24mo | Every 36mo | Every 200h | Every 500h |
|---|---|---|---|---|---|---|---|
| Change Change Fuel Filter | |||||||
| Change Change Oil | |||||||
| Change Change Oil Filter | |||||||
| Inspect Inspect coolant levels & state | |||||||
| Inspect Inspect there is no clogging, that filters are clean | |||||||
| Inspect Check for water in fuel filter | |||||||
| Change Change Air Filter | |||||||
| Inspect Inspect belt tension & Inspect belts for wear and tears | |||||||
| Change Change Raw water impellar | |||||||
| Inspect Inspect calibrated heat exchanger cap visually | |||||||
| Inspect Inspect thermostat visually | |||||||
| Inspect Inspect engine mounts visually | |||||||
| Mechanical Check & Adjust valve clearances |