Z8V.370 Nanni
Nanni
Ref. Z8V.370
The Z8V.370 is a 370 HP (272 kW) marine diesel inboard engine based on a Toyota engine platform, featuring an 8-cylinder V90° configuration with 4.5-litre displacement and twin turbochargers. It uses a high-pressure Common Rail direct injection fuel system with electronic control, and is cooled by a closed cooling system with heat exchanger. Compliant with RCD2 2013/53/EU and EPA Marine Tier 3 emission standards, it is designed for powerboat applications with shaft line or stern drive transmission.
Characteristics
Hover any value for notes and sourcesHorse Power
370
Hp
Torque
—
Nm
Torque
—
Weight
435KG
Number of Cylinders
8
Cylinder Layout
v
Displacement litres
4.5Liter
Is Injection
Yes
Has a Turbo
Yes
Block Material
—
Cooling System
Water-cooled
Compression Ratio
—
Starter Type
—
RPM Range
—
Emission Standard
EPA Tier 3
Dimensions
138.9 × 84.1 × 75.6
cm
Certifications
RCD
Documentation URL
https://nannienergy.com/fr/produit/z8v-370/
Maintenance schedule
14 tasks · 7 intervals
No maintenance data is available for this equipment. Showing generic defaults —
likely incorrect for this specific model.
| Task | After 50h | Daily | Every 12mo | Every 24mo | Every 36mo | Every 200h | Every 500h |
|---|---|---|---|---|---|---|---|
| Change Change Fuel Filter | |||||||
| Change Change Oil | |||||||
| Change Change Oil Filter | |||||||
| Inspect Inspect coolant levels & state | |||||||
| Inspect Inspect there is no clogging, that filters are clean | |||||||
| Inspect Check for water in fuel filter | |||||||
| Change Change Air Filter | |||||||
| Inspect Inspect belt tension & Inspect belts for wear and tears | |||||||
| Inspect Inspect turbocharger visually | |||||||
| Change Change Raw water impellar | |||||||
| Inspect Inspect calibrated heat exchanger cap visually | |||||||
| Inspect Inspect thermostat visually | |||||||
| Inspect Inspect engine mounts visually | |||||||
| Mechanical Check & Adjust valve clearances |