N6.230 Nanni
Nanni
Ref. N6.230
The Nanni N6.230 is a 6-cylinder inline, 4-stroke diesel inboard marine engine based on a John Deere engine base, producing 228 CV (168 kW) from a 6.8-litre displacement. It features turbocharged air intake, closed cooling with heat exchanger, direct injection with mechanical governor, and is HVO compliant. Compatible with shaft line, water jet, and surface drive transmissions, and meets IMO MARPOL Annex VI and EPA Marine Tier 3 emission standards.
Characteristics
Hover any value for notes and sourcesHorse Power
228
Hp
Torque
—
Nm
Torque
—
Weight
735KG
Number of Cylinders
6
Cylinder Layout
inline
Displacement litres
6.8Liter
Is Injection
Yes
Has a Turbo
Yes
Block Material
—
Cooling System
Water-cooled
Compression Ratio
—
Starter Type
—
RPM Range
—
Emission Standard
EPA Tier 3–IMO Tier III
Dimensions
115.2cm × 88.4cm × 73.5cm
Certifications
—
Documentation URL
https://nannienergy.com/fr/produit/moteur-n6-230/
Maintenance schedule
14 tasks · 7 intervals
No maintenance data is available for this equipment. Showing generic defaults —
likely incorrect for this specific model.
| Task | After 50h | Daily | Every 12mo | Every 24mo | Every 36mo | Every 200h | Every 500h |
|---|---|---|---|---|---|---|---|
| Change Change Fuel Filter | |||||||
| Change Change Oil | |||||||
| Change Change Oil Filter | |||||||
| Inspect Inspect coolant levels & state | |||||||
| Inspect Inspect there is no clogging, that filters are clean | |||||||
| Inspect Check for water in fuel filter | |||||||
| Change Change Air Filter | |||||||
| Inspect Inspect belt tension & Inspect belts for wear and tears | |||||||
| Inspect Inspect turbocharger visually | |||||||
| Change Change Raw water impellar | |||||||
| Inspect Inspect calibrated heat exchanger cap visually | |||||||
| Inspect Inspect thermostat visually | |||||||
| Inspect Inspect engine mounts visually | |||||||
| Mechanical Check & Adjust valve clearances |