Discussions History

N6.160 Nanni

Nanni Ref. N6.160
Last edited by
? 2026-04-19 18:05
0 contributors · 1 edit
Sources · 0 cited
No sources cited
The Nanni N6.160 is a 6-cylinder inline 4-stroke diesel inboard marine engine based on a John Deere engine base, displacing 6.8 litres and producing 154 HP (115 kW). It features direct injection, a mechanical governor, turbocharging, and closed cooling with a heat exchanger. The engine is HVO compliant, IMO MARPOL Annex VI and EPA Marine Tier 3 certified, and compatible with shaft line, water jet, and surface drive transmissions.

Characteristics

Hover any value for notes and sources
Horse Power
154 Hp
Torque
— Nm
Torque
—
Weight
578KG
Number of Cylinders
6
Cylinder Layout
inline
Displacement litres
6.8Liter
Is Injection
Yes
Has a Turbo
Yes
Block Material
—
Cooling System
Water-cooled
Compression Ratio
—
Starter Type
—
RPM Range
—
Emission Standard
EPA Tier 3–IMO Tier II
Dimensions
115.2cm  × 88.4cm  × 73.5cm
Certifications
—
Documentation URL
https://nannienergy.com/fr/produit/moteur-n6-160/

Maintenance schedule

14 tasks · 7 intervals
No maintenance data is available for this equipment. Showing generic defaults — likely incorrect for this specific model.
Task After 50h Daily Every 12mo Every 24mo Every 36mo Every 200h Every 500h
Change Change Fuel Filter
Change Change Oil
Change Change Oil Filter
Inspect Inspect coolant levels & state
Inspect Inspect there is no clogging, that filters are clean
Inspect Check for water in fuel filter
Change Change Air Filter
Inspect Inspect belt tension & Inspect belts for wear and tears
Inspect Inspect turbocharger visually
Change Change Raw water impellar
Inspect Inspect calibrated heat exchanger cap visually
Inspect Inspect thermostat visually
Inspect Inspect engine mounts visually
Mechanical Check & Adjust valve clearances