T6.300 Nanni
Nanni
Ref. T6.300
The Nanni T6.300 is a 6-cylinder inline, 4-stroke diesel inboard engine based on a Toyota engine platform, producing 305 CV (224.4 kW) from a 4.2-litre displacement. It features direct mechanical fuel injection, turbocharging with intercooler, and closed cooling with heat exchanger. The compact design offers high power density, easy routine servicing, and supports shaft line or water jet transmission.
Characteristics
Hover any value for notes and sourcesHorse Power
305
Hp
Torque
—
Nm
Torque
—
Weight
469KG
Number of Cylinders
6
Cylinder Layout
inline
Displacement litres
4.2Liter
Is Injection
Yes
Has a Turbo
Yes
Block Material
—
Cooling System
Water-cooled
Compression Ratio
—
Starter Type
—
RPM Range
—
Emission Standard
—
Dimensions
124.2 × 66.9 × 75.6
cm
Certifications
RCD
Documentation URL
—
Maintenance schedule
14 tasks · 7 intervals
No maintenance data is available for this equipment. Showing generic defaults —
likely incorrect for this specific model.
| Task | After 50h | Daily | Every 12mo | Every 24mo | Every 36mo | Every 200h | Every 500h |
|---|---|---|---|---|---|---|---|
| Change Change Fuel Filter | |||||||
| Change Change Oil | |||||||
| Change Change Oil Filter | |||||||
| Inspect Inspect coolant levels & state | |||||||
| Inspect Inspect there is no clogging, that filters are clean | |||||||
| Inspect Check for water in fuel filter | |||||||
| Change Change Air Filter | |||||||
| Inspect Inspect belt tension & Inspect belts for wear and tears | |||||||
| Inspect Inspect turbocharger visually | |||||||
| Change Change Raw water impellar | |||||||
| Inspect Inspect calibrated heat exchanger cap visually | |||||||
| Inspect Inspect thermostat visually | |||||||
| Inspect Inspect engine mounts visually | |||||||
| Mechanical Check & Adjust valve clearances |