SD60-4 Yanmar
Yanmar
Ref. SD60-4
The Yanmar SD60-4 is the SD60 saildrive variant for the JH common rail 4JH80 engine, with a mechanical multiple friction disc clutch and oil-bath lubrication (2.8 L standard, 3.0 L with the 75 mm extended leg). Available in 2.23:1 or 2.49:1 reduction (same ahead and astern). Propeller rotation is selectable (counterclockwise or clockwise viewed from stern). Dry weight 45.1 kg (49.7 kg extended leg). Dual rubber diaphragm hull seal with water ingress sensor; diaphragms must be replaced every 7 years.
Characteristics
Hover any value for notes and sourcesWaterproof Seal
Yes
Gear Ratio
2.23
Rating
Light Duty / High Output / Pleasure Duty
Forward Direction
Reversible
Weight
45.1KG
Torque Capacity
—
Nm
Cooling System
—
Material
Aluminium
Dimensions
—
Certifications
—
Sources
1 citedMaintenance schedule
9 tasks · 6 intervals| Task | After 50h | Every 1yr | Every 7yr | Seasonal | Every 250h | Every 2000h |
|---|---|---|---|---|---|---|
| Change Change Gearbox Oil | ||||||
| Inspect Check cable connections | ||||||
| Inspect Inspect engine mounts visually | ||||||
| Inspect Check for corrosion | ||||||
| Inspect Inspect Sail Drive Bellows | ||||||
| Test Test Alarm | ||||||
| Inspect Inspect the anodes and change them of necessary | ||||||
| Inspect Inspect Propeller for Damage & Fouling | ||||||
| Inspect Inspect there is no clogging, that filters are clean |