D2-75 Saildrive Volvo Penta
Volvo Penta
Ref. D2-75
The Volvo Penta D2-75 is a 2.2-litre (134 cu in), in-line four-cylinder marine diesel from the D2 series, turbocharged with charge air cooler, rated 55 kW / 75 hp at the crankshaft, offered with Volvo Penta saildrive. It uses a cam-driven in-line injection pump, freshwater cooling, a 115 A alternator with built-in charging sensor and runs on diesel or HVO. Certified to EPA Tier 3, EU RCD Stage II and BSO II. Max torque 210 Nm at 2000 rpm and rated speed 3000 rpm per Volvo Penta's D2-75 launch release.
Characteristics
Hover any value for notes and sourcesHorse Power
75
Hp
Torque
210Nm
Torque
Light Duty / High Output / Pleasure Duty
Weight
—
KG
Number of Cylinders
4
Cylinder Layout
inline
Displacement litres
2.2Liter
Is Injection
Yes
Has a Turbo
Yes
Block Material
—
Cooling System
Water-cooled
Compression Ratio
—
Starter Type
Electric
RPM Range
3000
Emission Standard
EU Stage II–EPA Tier 3–Other Regional Standard
Dimensions
—
Certifications
—
Sources
3 citedMaintenance schedule
11 tasks · 5 intervals
Maintenance shown is sourced from
similar equipment
and is provided as a reference only.
| Task | After 50h | Every 1yr | Every 4yr | Every 200h | Every 600h |
|---|---|---|---|---|---|
| Change Change Fuel Filter | |||||
| Change Change Oil | |||||
| Inspect Inspect belt tension & Inspect belts for wear and tears | |||||
| Inspect Inspect coolant levels & state | |||||
| Change Change Air Filter | |||||
| Change Change Raw water impellar | |||||
| Inspect Inspect the anodes and change them of necessary | |||||
| Inspect Inspect seals for potential leaks | |||||
| Change Change distribution belt | |||||
| Mechanical Check & Adjust valve clearances | |||||
| Change Change Oil Filter |