Sealord 51 - 4 stroke diesel engine
Last edited by
oliverde8
at
Equipment Characteristics
- Brand: BMC
- Model Name: B-51
- Marketing start date:
- Marketing end date: Unknown
Additional Characteristics
- horsepower: 90 Hp
- torque: 1 Nm
- rating: Light Duty / High Output / Pleasure Duty
- weight: 700 KG
- cylinders: 6
- cylinder_configuration: inline
- volume: 1.588 Liter
- injection: No
- turbo: No
- block_material: Cast Iron
- cooling_system: Water-cooled
- compression_ratio: 1,
- starter_type: Electric
- rpm_range:
- emission_standard: No Compliance
Maintenances
No maintenances have been contributed on this equipment. No similar equipment was found as well.
Maintenance shown are "default/generic" values. They are very probably incorrect.
| 50 | 12 | 24 | 36 | 200 | 500 | ||
|---|---|---|---|---|---|---|---|
| Change Fuel Filter | |||||||
| Change Oil | |||||||
| Change Oil Filter | |||||||
| Change Air Filter | |||||||
| Inspect belt tension & Inspect belts for wear and tears | |||||||
| Change Raw water impellar | |||||||
| Inspect calibrated heat exchanger cap visually | |||||||
| Inspect thermostat visually | |||||||
| Inspect engine mounts visually | |||||||
| Check & Adjust valve clearances | |||||||
| Inspect coolant levels & state | |||||||
| Inspect there is no clogging, that filters are clean | |||||||
| Check for water in fuel filter |