High Performance C7.1 Caterpillar Inc
Characteristics
Hover any value for notes and sourcesHorse Power
280
Hp
Torque
1100Nm
Torque
Intermittent Duty / Special Light Duty Commercial
Weight
760KG
Number of Cylinders
6
Cylinder Layout
inline
Displacement litres
7.01Liter
Is Injection
Yes
Has a Turbo
Yes
Block Material
Cast Iron
Cooling System
Water-cooled
Compression Ratio
16.5
Starter Type
Electric
RPM Range
2300
Emission Standard
EU Stage II–EPA Tier 3–China Stage II–IMO Tier II
Dimensions
—
Certifications
—
Documentation URL
—
Maintenance schedule
13 tasks · 9 intervals| Task | After 120h | After 870h | Daily | Every 12mo | Every 2yr | Every 50h | Every 250h | Every 1000h | Every 3000h |
|---|---|---|---|---|---|---|---|---|---|
| Mechanical Check & Adjust valve clearances | |||||||||
| Inspect Inspect coolant levels & state | |||||||||
| Inspect Inspect there is no clogging, that filters are clean | |||||||||
| Inspect Check for water in fuel filter | |||||||||
| Change Change Fuel Filter | |||||||||
| Change Change Oil | |||||||||
| Change Change Oil Filter | |||||||||
| Inspect Inspect belt tension & Inspect belts for wear and tears | |||||||||
| Inspect Inspect calibrated heat exchanger cap visually | |||||||||
| Inspect Inspect turbocharger visually | |||||||||
| Inspect Inspect engine mounts visually | |||||||||
| Inspect Inspect thermostat visually | |||||||||
| Inspect Inspect the anodes and change them of necessary |