SD50-4T Yanmar
Yanmar
Ref. SD50-4T
The Yanmar SD50-4T is the SD50 saildrive variant for the turbocharged 4JH4-TCE engine, with a cone clutch, 2.32:1 reduction ahead and astern and oil-bath lubrication (2.2 L standard; 2.35 L with 58 mm extension, 2.45 L with 100 mm extension). Propeller rotation counterclockwise or clockwise viewed from stern. Dry weight 41 kg. Uses QuickSilver High Performance Gear Oil. Cone clutch: inspect/replace or lap every 500 hours and replace every 2000 hours (dealer). Rubber diaphragm hull seal with seal sensor. Superseded by the SD60-4.
Characteristics
Hover any value for notes and sourcesWaterproof Seal
Yes
Gear Ratio
2.32
Rating
Light Duty / High Output / Pleasure Duty
Forward Direction
Reversible
Weight
41KG
Torque Capacity
—
Nm
Cooling System
—
Material
Aluminium
Dimensions
—
Certifications
—
Sources
1 citedMaintenance schedule
8 tasks · 6 intervals| Task | After 50h | Every 1yr | Every 5yr | Every 100h | Every 250h | Every 2000h |
|---|---|---|---|---|---|---|
| Change Change Gearbox Oil | ||||||
| Inspect Check cable connections | ||||||
| Inspect Inspect engine mounts visually | ||||||
| Inspect Check for corrosion | ||||||
| Inspect Inspect there is no clogging, that filters are clean | ||||||
| Inspect Inspect Sail Drive Bellows | ||||||
| Test Test Alarm | ||||||
| Inspect Inspect the anodes and change them of necessary |